XF Horizontal Boiling Dryer

XF Horizontal Boiling Dryer

share

XF Horizontal Boiling Dryer

  • Product details

Summary:

Fluidized bed drying, also known as fluidized bed, is composed of air filter, heater, fluidized bed host, cyclone separator, bag filter, high-pressure centrifugal fan, and operating platform. Due to the different properties of the dried materials, the supporting dedusting equipment can be considered as required, and either cyclone separator, bag filter, or one of them can be selected, Generally speaking, cyclone separator is only required for drying of granules and granular materials with large specific gravity, and bag filter is required for small granular and powdery materials with light specific gravity, and pneumatic feeding device and belt conveyor are available for selection.

The granular solid materials are added into the fluidized bed dryer by the feeder. The filtered clean air is heated and then sent to the bottom of the fluidized bed by the blower to contact with the solid materials through the distribution plate, forming fluidization to achieve gas-solid heat and mass exchange. After the materials are dried, they are discharged from the discharge port, and the waste gas is discharged from the top of the fluidized bed and discharged after the solid powder is recovered by the cyclone dust collector group and bag type dust collector.

Steam, electric and hot blast furnaces can be used (according to user requirements).

It is applicable to the drying of bulk and granular materials, such as the drying and dehumidification of APIs, tablet granules, Chinese medicine granules, plastic resins, citric acid and other powder and granular materials in chemical raw materials, food and beverage granules, grain processing, corn germ, feed, etc. The maximum particle size of the material can reach 6mm, and the best is 0.5~3mm.


Feature:

Fluidized bed dryer is a continuous drying equipment, which can realize automatic production. The drying speed is fast, the temperature is low, the product quality can be guaranteed, and the GMP requirements for drug production can be met. The steam, electric and hot air furnaces can be used together.


Main technical parameter:

表格7.jpg